#Dsa815 tg generator
#Dsa815 tg manual
#Dsa815 tg portable
#Dsa815 tg license
#Dsa815 tg free

#Dsa815 tg free

A short piece of a precision IC socket can be used for the XTAL. Rigol DSA815-TG is a compact and lightweight 1.5GHz high-performance tracking spectrum analyzer with the best features. SPECIAL OFFER: With FREE DSA-800-EMI EMI Filter & Quasi peak Detector Software, valued at 1,112 Ex GST. The board uses SMA connectors and 0805 1% resistors. A short link is inserted in place of the crystal for calibration.ДЇull KiCAD project documentation for this fixture is included in this repository. This fixture consists of two PI attenuators that aim to match 50 ohm input and output of the spectrum analyzer to 12.5 ohms and a socket for the DUT.

#Dsa815 tg license

Advanced Measurement Kit active license (required for NdB markers)ДЄ simple measurement fixture is required to measure the XTAL parameters using this method.

Rigol DSA815-TG spectrum analyzer with tracking gen.

It lets you easily measure parameters of large batches of XTALs and produces a nice Excel spreadsheet. This tool uses what is known as the '-3dB method' to measure the crystal motional parameters. You will also need a measuring fixture as described by Jack K8ZOA in 'Crystal Motional Parameters: A Comparison of Measurement Approaches'

#Dsa815 tg generator

This is a tool that automates the process of measuring quarz crystal oscillator parameters using a Rigol DSA815-TG spectrum analyzer with the tracking generator option. With tracking generator 5.15 kg (11.XTAL parameter measurement with Rigol DSA815-TG Short interruption:0% UT during 250 cycles IEC 6:2001 В±4.0kV (contact discharge), В±4.0kV (air discharge) Temperature Operating temperature range 0вњ¬ to 50вњ¬ Input Voltage Range, AC 100 V to 240 V (nom.)

Mass Memory Flash Disk (internal), USB Disk (not supplied) The GUI to control the RF Demo Kit (Transmitter) directlyДSA Accessories Package (DSA Utility Kit) Measure lower than -130dBm signal with the standard PreamplifierД®MI Measurement (EMI Filter & Quasi-Peak & Pass_Fail) Readout the Spectrum Peak values with the Peak table function High measurement speed: the use of digital IF technology improves the bandwidth precision and selectivity of the filter, minimizing the scanning time and improving the speed of the measurement.Дistinguish the two nearby signals clearly with the 100Hz RBWД¬ompare the spectrums when change the RBW settings with different color trace Higher reliability: compared with traditional analog designs, the digital IF greatly reduces the complexity of the hardware, the system instability caused by channel aging, and the temperature sensitivity that can contribute to parts failure. High precision amplitude readings: this technology almost eliminates the errors generated by filter switching, reference level uncertainty, scale distortion, as well as errors produced in the process of switching between logarithmic and linear display of amplitude when using a traditional analog IF design. The ability to distinguish between small signals by frequency: using the IF filter with the smallest bandwidth setting it is possible to make out signals with a frequency difference of only 10 Hz. The ability to measure smaller signals: on the basis of this technology, the IF filter enables smaller bandwidth settings, which greatly reduce the displayed average noise level. The menu navigation is very intuitional in use and all functions and parameters are easy to reach because of the graphical interface.Д«enefits of Rigol's all digital IF design The Rigol Spectrum Analyzers have a sophisticated and easy to use user interface and offers multiple functions for all tasks.

#Dsa815 tg manual

These functions enable the analyzer to acquire signals and match parameters automatically, instead of the manual process necessary with a traditional analyzer. The very large display (20.3 cm / 8') of the Rigol DSA815 Spectrum Analyzer with a resolution of 800x480pixels provides a very good overview over all its comfortable functions like Auto Tune, Auto Range, Auto Scale and Auto Couple. This version is the base unit and does not include the tracking generator. The use of digital IF (intermediate frequency) technology guarantees reliability and performance to meet the most demanding RF applications.

#Dsa815 tg portable

The Rigol DSA815-TG is a compact and light Spectrum Analyzer with premium performance for portable applications. Rigol DSA815-TG - 9kHz to 1.5GHz with Pre-Amplifier and Tracking Generator Spectrum AnalyzerД¬ompact size, lightweight 4.25kg (9.4lbs)

Dsa815-tg